Figure 2-10 163 Protocol Settings; Figure 2-11 Scope Options - NEC UX5000 Resource Manual
Hide thumbs
Also See for UX5000:
- Manual (588 pages) ,
- Hardware manual (370 pages) ,
- Feature handbook (180 pages)
Table of Contents
Advertisement
UX5000 IP Terminal AutoConfig Setup
UX5000 IP Resource Manual
163 Protocol – This is the transmission that will be used (FTP).
◆
Select Add to enter the third NEC option code. Enter an option code
name (Protocol) in the Name field. Set the Data Type field to Byte, and
enter 163 in the Code field. Select OK to save the settings.
Figure 2-10 163 Protocol Settings
10. Left-click Scope options and select Configure Options to configure each
defined NEC option codes.
Figure 2-11 Scope Options
2 - 7
Advertisement
Table of Contents
