Ac Power Cord - NEC Xen Topaz System Hardware Manual

September 2004
26 -

3.2 AC Power Cord

The Power Switch and AC Power Inlet are located at the left hand side
of the KSU. The AC power cord is attached to the KSU, and is
connected to the AC Inlet and the commercial AC power socket.
Before connecting the AC power cord, make sure :
• the Power Switch at the left hand side of the KSU is turned OFF.
• the Power Switch at the commercial AC Power socket is turned OFF.
• the AC Plug fits the commercial AC power socket. The plug adapter is
necessary if it does not fit.
• The KSU must have its own Commercial AC Power Socket.
• DO NOT POWER ON until all installations have been completed.
• The power switch of the 924M KSU switches the DC power of the PSU, it
does not isolate mains power from the PSU. Always switch off the mains
power from the mains outlet prior to servicing the unit.
NEC Business Solutions Ltd
Installing the Main KSU