2.5.6 SPI expansion modules
Expansion module for analog axes/spindles in the HSCI system
Expansion module for analog axes/spindles in
the HSCI system:
CMA-H 04-04-00:
Module for controlling analog axes or
spindles. The CMA-H is inserted in one of the
SPI slots on the bottom of the controller units.
The analog control loop outputs are accessed
only via the NC. Interpolated movements of
analog axes with other axes are not possible.
CMA-H 04-04-00
January 2012
ID 688 721-xx
2.5 Component Overview of MANUALplus 620
93