HEIDENHAIN MANUALplus 620 Technical Manual page 732

732
MP_dir
Direction of the machine axis
Available from NCK software version: 597 110-03.
Format: Selection menu
Selection: X, Y, Z, A, B, C
Specifies the direction of the machine axis in the local
coordinate system, which is given by the previous coordinate
transformations.
An X or A entry means that the machine axis moves or rotates
in the X direction of the local coordinate system. Y and B stand
for the Y direction, Z and C for the Z direction.
Default: –
Access: LEVEL3
Reaction: RUN
HEIDENHAIN Technical Manual MANUALplus 620