HEIDENHAIN MANUALplus 620 Technical Manual page 22

Hide thumbs Also See for MANUALplus 620:

Modifying the max. number of spindles in the file oem.mcg or

oem_turning.mcg:

To modify the max. number of spindles in the PLC file oem.mcg or

oem_turning.mcg, proceed as follows:

DEFINE SPINDLE_COUNT

After an update, please modify the previous file plc.cfg as described below,

and add it to the PLCdesignNT project. Otherwise, during the next transfer

of PLC project files to the control, the file plc.cfg might be overwritten by

the old version, which leads to an error (Fatal Error Syntax).

HEIDENHAIN Technical Manual MANUALplus 620