HEIDENHAIN MANUALplus 620 Technical Manual page 430

Parameter
MP number
iTNC MP number
Paths
Definition of the paths and file names in effect for entire system
CfgOemPath
Paths for OEM files;
File paths that can be created and changed by the OEM.
oemTable
102001
dialogTextfile
102002
(optional parameter)
cycleMainTreeFile
102003
(optional parameter)
cycleSubTreeFiles
102004
(optional parameter)
oemCycle
102005
(optional parameter)
430
Function and input
Path for OEM tables
Format: String
Input: Path, max. 260 characters
Path entry via selection window
Default: %OEM%\table
Name of the text file for OEM texts
The path %OEM%\plc\language\en is preset by
the system, whereby the last subdirectory is
formed from the configured language (here en =
English).
Enter the name (without the path) for OEM text
files. You can enter a maximum of 11 files of the
*.CSV type in which you define your OEM-specific
texts.
Format: List [0 to 10]
Input: Name of the text file
Max. 80 characters
Path and name for the OEM cycle file (.CDF)
Format: String
Input: Path and name, max. 260
characters
List of path/names of user cycle files (.CDF)
The soft key rows of these files are appended to
the soft key rows of the HEIDENHAIN or OEM
files.
Format: List [0 to 10]
Input: Path and name, max. 260
characters
Path for OEM cycles
Format: String
Input: Path and name, max. 260
characters
HEIDENHAIN Technical Manual MANUALplus 620
Behavior Page
Access
SW vers.
RESET 1605
LEVEL3
RESET 370
LEVEL3
RESET 1546
LEVEL3
RESET 1546
LEVEL3
RESET 1546
LEVEL3