HEIDENHAIN MANUALplus 620 Technical Manual page 454

Hide thumbs Also See for MANUALplus 620:

iTNC MP number

(optional parameter)

Function and input

Function is output in a separate strobe

With the "singular" parameter you can prevent the

function from being output in a strobe together

with other functions. If several M, S, T functions

are programmed in an NC block, the strobes can

be set in parallel by the NC. With this parameter,

you can exclude the current function from this

parallel collection and simultaneous transmission

in one strobe.

Selection menu

Function is output in a separate strobe.

Combined output is prevented.

Function can be combined with other functions

Code output also during block scan

Selection menu

TRUE or FALSE

Function is also output during the block scan

Function is not output during the block scan.

The function is collected and restored.

HEIDENHAIN Technical Manual MANUALplus 620