HEIDENHAIN MANUALplus 620 Technical Manual page 738

738
MP_kinCompositeModels
List of key names of kinematic models for this machining
channel
Available from NCK software version: 597 110-03.
Format: Selection menu
Selection: Key names from Channels/Kinematics/CfgKinComposModel
Default: –
Access: LEVEL3
Reaction: RUN
MP_kinemToActivate
Kinematics to be activated / Active kinematics
Available from NCK software version: 597 110-03.
Format: Selection menu
Selection: Key names from Channels/Kinematics/CfgKinComposModel
Select the key name of the kinematics configuration to be
activated. You can also see from this parameter which
kinematics configuration is currently active.
Default: –
Access: LEVEL3
Reaction: RUN
Note
As an alternative you can configure the kinematics with the PC software
KinematicsDesign. Registered customers can download the software from
HESIS-Web Including Filebase on the Internet at http://
hesis.heidenhain.de. The User's Manual is included with the software as
online help.
HEIDENHAIN Technical Manual MANUALplus 620