HEIDENHAIN MANUALplus 620 Technical Manual page 39

1.2.2 Description of the new functions
Software options
January 2012
The features of the following MANUALplus 620 options will change as of NC
software version 548 328-03:
Software option 3—tools and technology (option 10)
This option is no longer required for the support of multi-edge tools (tools
with multiple cutting edges or multiple reference points) in smart.Turn and
DIN programs. The support is now included in the standard features of the
NC software.
Touch probe functions (option 17)
This option has been expanded by automatic workpiece measurement with
touch probes.
1.2 NC Software 548 328-03 39