HEIDENHAIN MANUALplus 620 Technical Manual page 591

Parameter
MP number
iTNC MP number
coorTrafo
600415
kinModelToModify
600418
kinModel
600419
mirroringAxes
600416
January 2012
Function and input
Modified coordinate transformations (up to NC
software 548 328-02)
Enter the key names of the coordinate
transformations that are to replace the
transformations in coorTrafoToModify at the
same position during axis mirroring.
Format: List [0 to 100]
Input: Selection menu
Coordinate transformations off
CfgTrafoByDir
Subkinematics to be replaced
Enter the key names of the subkinematics that are
to be replaced by the subkinematics in kinModel at
the same position during axis mirroring.
Format: List [0 to 100]
Input: Selection menu
Coordinate transformations off
CfgKinSimpleModel
Subkinematics to be activated
Enter the key names of the subkinematics that are
to replace the subkinematics in
kinModelToModify at the same position during
axis mirroring.
Format: List [0 to 100]
Input: Selection menu
Coordinate transformations off
CfgKinSimpleModel
Axes to be mirrored
Enter the key names of the axes that are to be
mirrored for this tool holder.
Format: List [0 to 100]
Input: Selection menu
Key names from
Axes/PhysicalAxis
4.10 List of Machine Parameters
Reaction/ Page
Access
RESET 761
LEVEL3
RESET 746
LEVEL3
RESET 746
LEVEL3
RESET 1403
LEVEL3
591