HEIDENHAIN MANUALplus 620 Technical Manual page 803

Hide thumbs Also See for MANUALplus 620:

Functional sequence if MP_refType=without Switch

For linear measurement using a rotary encoder, a reference pulse is produced

at each revolution of the encoder. During the reference run the first reference

pulse traversed after the trip dog for reference end position is closed is

evaluated. This ensures that the same reference pulse is always evaluated.

For linear measurement using a rotary encoder, HEIDENHAIN recommends

using the MP_refType=Switch, changing dir method.

January 2012

6.15 Reference Marks