HEIDENHAIN MANUALplus 620 Technical Manual page 120

User functions
DIN PLUS programming
Program verification graphics
Machining time analysis
120
MANUALplus 620
NC programming as per DIN 66025 (ISO 6983)
Extended command format (IF...THEN...ELSE...)
Simple geometry programming (calculation of missing data)
Powerful fixed cycles for turning, recessing, recess turning and
thread machining
Powerful fixed cycles for boring, drilling and milling with the C
axis
Powerful fixed cycles for drilling and milling with the Y axis
(option 70)
Subroutines
Technology functions for full-surface machining:
- Traversing to a fixed stop
- Parting control
- Spindle synchronization
- Mirroring and converting
- Mechatronic tailstock
Programming with variables
Contour description with ICP
Program verification graphics for workpiece blank and finished
part
Turret assignment and other setup information in the DIN PLUS
program
Conversion of smart.Turn units into DIN PLUS command
sequences
Parallel programming
Parallel simulation
Graphic simulation of cycle execution for cycle programs,
smart.Turn or DIN PLUS programs:
Display of the tool paths as wire-frame or cutting-path graphics,
special identification of the rapid-traverse paths
Machining simulation (2-D material-removal graphic)
Side or face view, or 2-D view of cylindrical surface for
verification of Caxis machining
Display of programmed contours
View of face and YZ plane for verification of Y-axis machining
Workpiece blank definition
Three-dimensional graphic display of the workpiece blank and
finished part
Shifting and magnifying functions
Calculation of machining time and idle machine time
Consideration of switching commands triggered by the CNC
Individual times per cycle or tool change
HEIDENHAIN Technical Manual MANUALplus 620