HEIDENHAIN MANUALplus 620 Technical Manual page 500

Parameter
MP number
iTNC MP number
geoTDefCycPath
200408
geoAutoTCallSycle
200409
geoPalletCtrlCycle
200410
plcSetPresetCycle
200411
progSelectCycle
200412
afterMdiCycle
200413
(optional parameter)
geoTConsCycle
200414
(optional parameter)
500
Function and input
Path/name for the TOOL DEF cycle
Format: String
Input: Max. 260 characters
Path/name for the automatic TOOL CALL cycle
TOOL CALL after expiration of tool life.
Format: String
Input: Max. 260 characters
Path/name of the pallet control cycle
Format: String
Input: Max. 260 characters
Path/name of the preset set cycle for PLC
module 9090/9281
Format: String
Input: Max. 260 characters
Path/name of the program selection cycle
Is called when an NC program is selected via the
file manager.
Format: String
Input: Max. 260 characters
Path/name of the trailer program when
leaving MDI
Is called when the Positioning with Manual Data
Input mode is exited.
Format: String
Input: Max. 260 characters
Path/name of the cycle for tool-data
consistency
Path of the cycle for loading tool data if the current
tool has changed outside of a program run.
Format: String
Input: Max. 260 characters
HEIDENHAIN Technical Manual MANUALplus 620
Reaction/ Page
Access
RESET –
LEVEL3
RESET –
LEVEL3
RESET –
LEVEL3
RESET –
LEVEL3
RESET –
LEVEL3
RESET –
LEVEL3
RESET –
LEVEL3