HEIDENHAIN MANUALplus 620 Technical Manual page 737

January 2012 6.11 Machine Kinematics (As of NC Software 548328-03)
 Last step: Assign the configured kinematics models to the machining
channel.
The settings for the machining channel (ChannelSettings/CH_NC1) must
include the kinematic models valid for this channel:

Open the CfgKinList configuration object. Enter in the
kinCompositeModels list parameter the key names of the kinematic
models for the machining channel.

Open the CfgAcitvateKinem configuration object. Choose from the
selection menu of the MP_kinemToActivate parameter the key name of
the kinematic model to be activated.
737