HEIDENHAIN MANUALplus 620 Technical Manual page 711

6.10.2 Linear axis error compensation
January 2012
Settings in the configuration editor
Axes
ParameterSets
[Key name of the parameter set]
CfgAxisComp
linearCompValue
compType
The parameter object CfgAxisComp is not required for:
Virtual axes (MP_axisMode=Virtual)
Axes that are for display only (MP_axisMode=Display)
Note
Linear axis error compensation is not available for rotary axes!
For every linear axis you can compensate a linear axis error.
Positive linear axis error: The table moves too far.
Negative linear axis error: The table moves too short a distance.
Error
[mm]
0.02
0.01
0
Ref. mark
-0.01
-0.02
6.10 Axis Error Compensation
500 1000
MP number
401803
401804
Encoder
[mm]
711