HEIDENHAIN MANUALplus 620 Technical Manual page 142

Hide thumbs Also See for MANUALplus 620:

Then press the FILES soft key to place the cursor in the right window on file

level. Use the SELECT soft key to select the setup.zip file. The control checks

whether the selected setup file can be used for the current software version

of the control.

Confirm the confirmation request "Do you really want to switch off?". The

NC software is now automatically shut down and then the actual update

program is started.

Select a dialog language.

The next dialog field shows the old and new software. Confirm the

confirmation request "Do you really want to install the software now?".

Now the software update is started. The bar diagram displays the current

progress of installation.

After the software update is complete you will be prompted to restart the

control. If you have used a USB stick, remove it before restarting the control.

While the control is running up, the dialog window for entering the code

number appears. Enter here 95148.

In the next step you are prompted to check the update rules. Press the

UPDATE RULES soft key.

To leave the update rules, press the END soft key.

In the next step, check the configuration data by pressing the CONFIG DATA

HEIDENHAIN Technical Manual MANUALplus 620