HEIDENHAIN MANUALplus 620 Technical Manual page 359

UpdAttribute
Remove
January 2012
The indicated machine parameter is removed from all configuration objects of
the machine configuration.
This update rule is needed in case a machine parameter is not supported by a
newer version of the NC software. This way you can automatically correct
your configurations in the field.
Syntax:
UpdAttributeRemove (
entity
version
attrName
)
Example:
UpdAttributeRemove (
entity:="CfgSimulation",
version:=1.02,
attrName:="cc424"
)
The MP_cc424 parameter is removed from all configuration objects with the
name CfgSimulation.
4.2 The "Machine Parameters" Mode of Operation
:= STRING, ; Name of the configuration
object
:= REAL, ; Version number
:= STRING, ; Name of the machine
parameter to be removed
359