Table of Contents
Advertisement
Installation Manual
About this manual
The purpose of this manual is to present the descriptions and drawings required to install the
Simrad SR15 Catch Monitoring Receiver.
Target audience
The manual is intended for technical personnel; such as skilled shipyard workers,
electricians, qualified engineers and naval architects. It is assumed that you understand
the general principles of maritime electronic equipment. You must also be familiar with
the installation of electronic and mechanical products. You are expected to have basic
mechanical skills and familiarity with handling of sensitive electronic equipment.
Installation instructions and drawings
The information in this document must be regarded as general guidelines and
recommendations only. The installation shipyard must design and manufacture installation
hardware to fit each individual hydrophone on the vessel.
Note
The installation shipyard must provide all necessary design and installation drawings, as
well as the relevant work standards and mounting procedures.
If required, all documents provided by the shipyard for the physical installation of the SR15
must be approved by the vessel's national registry and corresponding maritime authority
and/or classification society. Such approval must be obtained before the installation can
begin. The shipowner and shipyard doing the installation are responsible for obtaining and
paying for such approval.
Kongsberg Maritime AS will accept no responsibility for any damage or injury to the
system, vessel or personnel caused by equipment that has been incorrectly installed or
maintained, or by drawings, instructions or procedures that have not been prepared by us.
The outline dimensions of the SR15 hydrophone and the relevant installation items can be
found in the Drawing file chapter in this manual.
End user manuals and source drawings (normally in AutoCad format) can be downloaded
from our website.
•
https://www.simrad.com
Registered trademarks
Observe the registered trademarks that apply.
Windows
®
is a registered trademark of Microsoft Corporation in the United States and
other countries.
5
423850/A
Advertisement
Table of Contents
