Paper Feed Operation - Canon Booklet Finisher-D1 Service Manual

2
Technology > Saddle Stitcher Unit > Paper Feed Operation

Paper Feed Operation

1) The saddle leading edge stopper and saddle trailing edge stay move into position based
on the paper size. Also, the saddle roller guide rises. (In case of thin paper (under 64g/m
roller guide movement control is performed.)
[3]
[1] Saddle trailing edge stay
[2] Saddle leading edge stopper
2 Technology > Saddle Stitcher Unit > Paper Feed Operation
[1]
[2]
F-2-48
[3] Saddle roller guide
2) The paper is transported to the stitcher unit by the saddle feed roller.
3) Once the saddle inlet sensor (PS101) detects the paper, the saddle alignment roller rotates
and drives the saddle pull roller disengage motor and the saddle alignment roller disengage
2
),
solenoid so that the paper is transported by the pull roller and alignment roller till it reaches
the process stopper.
PS101
[3]
[4]
[1] Paper
[2] Saddle inlet roller
[3] Pull roller
[4] Alignment roller
[5] Process stopper
[2]
[1]
[5]
F-2-49
PS101 : Saddle inlet roller
2-31
2-31