Adjusting Delivery Angle; Preparations - Canon Booklet Finisher-D1 Service Manual

5
Adjustment > Auxiliary Adjustment > Adjusting Delivery Angle > Preparations

Adjusting Delivery Angle

This adjustment is executed at poor stackability due to curled paper or take-up feed of paper
at delivery.
<In the case of lower curl>
<When take-up feed of paper occurred>
* Take-up feed of paper: A stacking failure which occurs when a paper to be delivered pushes
a paper already delivered to a tray toward the feed direction depending on the delivery angle.
<In the case of upper curl>
5 Adjustment > Auxiliary Adjustment > Adjusting Delivery Angle > Preparations
F-5-294
F-5-295
F-5-296
<When trailing edge leaning occurred>
* Trailing edge leaning: A stacking failure which occurs when trailing edge of paper to be
delivered is caught at the delivery outlet depending on the delivery angle.

■ Preparations

1) Turn ON the power of the finisher.
2) Turn ON the power of the host machine to be on to be on standby.
3) Open the front cover and put the door switch tool into the door switch.
4) Remove the switch cover.
NOTE:
Refer to "Preparations 5-6" for details of step 1) to 4).
5-122
F-5-297
5-122