Canon Booklet Finisher-D1 Service Manual page 126

4
Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the Process Tray Unit > Procedure
CAUTION:
• After removing it, be sure to place the unit with the 4 protrusions [1] of the frame
facing down.
• Be careful not to trap the harness [2] when putting it down.
[1]
[2]
4 Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the Process Tray Unit > Procedure
[1]
F-4-144
F-4-145
2) Remove the Process Tray Unit [1].
• 9 Connectors [2]
• 4 Screws [3]
x9
[1]
x4
[2]
CAUTION: Points to Note at Installation
1.Hold the 2 grips [1] of the frame, and hook the 2 hooks [2] on the 2 holes of the frame
on the host machine side.
[2]
[1]
4-63
F-4-146
[2]
F-4-147
4-63