Connecting With The Document Insertion Unit - Canon Booklet Finisher-D1 Service Manual

11) Install the Rear Cover.
• 8 Screws
12) Install the Shunt Cable.
• 2 Screws (RS tighting; M4x10)
x2
Shunt Cable
7
Installation > Installation Procedure > Connecting with the Document Insertion Unit
F-7-53
7 Installation > Installation Procedure > Connecting with the Document Insertion Unit

Connecting with the Document Insertion Unit

CAUTION:
Be sure the power of the Host Machine is turned OFF and the Power Plug is
disconnected from the outlet.
1) On the Document Insertion Unit upper left side, install the Latch Plate (Front) Latch Plate
(Rear).
• 4 Screws (RS tighting; M4x10)
CAUTION:
Confirm the engraved mark on each Latch Plate when attaching.
Latch Plate (Front) : F
Latch Plate (Rear) : R
x4
Latch Plate(Rear)
7-21
Latch Plate(Front)
F-7-54
7-21