Canon Booklet Finisher-D1 Service Manual page 335

8) Fix the front Latch Plate (Front).
• 1 Screw (Use the Screw removed in the step 5) of "Before Installing Finisher" )
Screw
9) Shut the Front Cover of the Finisher.
7
Installation > Installation Procedure > Connecting with the Host Machine
Latch Plate(Front)
F-7-29
7 Installation > Installation Procedure > Connecting with the Host Machine
10) Lift up the rear Latch Base (Rear) to fit the pin and fix it.
• 1 Screw (Use the Screw removed in the step 7) of "Before Installing Finisher" )
Latch Plate(Rear)
7-13
Screw
F-7-30
7-13