Canon Booklet Finisher-D1 Service Manual page 114

4
Parts Replacing and Cleaning > Feed Assembly > Removing the Side Registration Shift Unit > Procedure
6) Remove the Detection Drive Assembly [1].
• 2 Connectors [2]
• 4 Screws [3]
[1]
[3]
7) Disconnect the Flat Cable [1].
• 1 Connector [2]
• 1 Guide [A]
[A]
4 Parts Replacing and Cleaning > Feed Assembly > Removing the Side Registration Shift Unit > Procedure
[3]
[2]
F-4-108
[2]
[1]
F-4-109
8) Disconnect the 7 connectors [1].
• 1 Reuse Band [2]
x7
[1]
9) Remove the Harness Guide [1].
• 1 Screw [2]
4-51
[1]
[2]
[1]
[1]
F-4-110
[2] [1]
F-4-111
4-51