Canon Booklet Finisher-D1 Service Manual page 307

5
Adjustment > Auxiliary Adjustment > Upper/Lower Neat Paddle position adjustment > Procedure
3) By pressing the Push Switch SW383 [1] or SW384 [2], mode can be selected.
Every time SW384 [2] is pressed, "0: Upper Neat Paddle/1: Lower Neat Paddle" is
displayed on the LED [3]. Determine the mode by pressing SW385 [4].
SW382
SW381
SW383 SW384 SW385
(-) (+)
[1]
4) By pressing the Push Switch SW385 [1], the adjustment value is displayed on LED [3].
Then, press SW383 [4] or SW384 [2] to change the adjustment value in increments of 1
pulse.
• Adjustment range: +7 to -7 (shift amount per unit: 1 mm)
SW382
SW381
SW383 SW384 SW385
(-) (+)
[4]
5 Adjustment > Auxiliary Adjustment > Upper/Lower Neat Paddle position adjustment > Procedure
[3]
ENTER
[2] [4]
F-5-323
[3]
ENTER
[2] [1]
F-5-324
<Adjusting the Upper Neat Paddle [1] Position>
<Adjusting the Lower Neat Paddle [1] Position>
5-131
-
+
[1]
F-5-325
-
+
[1]
F-5-326
5-131