Removing The Inlet Feed Motor; Preparation; Procedure - Canon Booklet Finisher-D1 Service Manual

4
Parts Replacing and Cleaning > Feed Assembly > Removing the Inlet Feed Motor > Procedure

Removing the Inlet Feed Motor

■ Preparation

1) Remove the Rear Cover.(Refer to page 4-20)

■ Procedure

1) Free the harness [1].
• 1 Edge Saddle [2]
• 2 Wire Saddles [3]
4 Parts Replacing and Cleaning > Feed Assembly > Removing the Inlet Feed Motor > Procedure
x3
[2] [1]
[3] [3]
F-4-82
2) Remove the Inlet Feed Motor Unit [1].
• 1 Connector [2]
• 2 Screws [3]
[1]
[3]
3) Remove the Inlet Feed Motor [1].
• 2 Screws [2]
[2]
[1]
4-42
[3]
[2]
F-4-83
F-4-84
4-42