Feed Belt - Canon Finisher-AB1 Service Manual

Chapter 4
4.4.3.3 Removing the Handling Tray (rear)
1) Shift the handling tray aligning plate (rear) [1] in
the direction of the arrow; then, remove the screw
[2] and the claw [3] to detach the handling tray
aligning plate (rear).
[2]
F-4-84
2) Remove the handling tray (rear) [1].
- 2 screws [2]
[2]
F-4-85
4-22
0015-2169
[1] [3]
[1]

4.4.4 Feed Belt

4.4.4.1 Before Removing the Transport
Belt
1) Remove the stacking wall (upper). (page 4-
5)Reference[Removing
(upper)]
2) Remove the stacking wall (lower). (page 4-
5)Reference[Removing
(lower)]
3) Remove the handling tray unit. (page 4-
20)Reference[Removing the Handling Tray
Unit]
4.4.4.2 Removing the Transport Belt
1) Remove the protective cover [1].
- 1 screw [2]
F-4-86
2) Loosen the screw [1], and shift the coupling (rear)
[2] to the left.
[1]
F-4-87
the Stacking Wall
the Stacking Wall
[1]
[2]
[2]
0015-2170
0015-2171