Checking Connection
1) Input connection step of Finisher.
Service Mode (Level 1) > COPIER > OPTION > ACCPST-D > ACC1 to 8
NOTE:
In the case of directly connecting to the Host machine, enter "1" and press "OK".
2) Exit from Service Mode
3) Turn OFF the Main Power Switch of the machine and Finisher.
4) Turn ON the power of the Finisher then the Host Machine.
CAUTION:
Be sure to power cycle after specifying the connecting order otherwise the accessories
will not be recognized.
7
Installation > Installation Procedure > Checking Connection
7
Installation > Installation Procedure > Checking Connection
7-27
7-27