Stapling Operation - Canon Booklet Finisher-D1 Service Manual

2
Technology > Intermediate Process Tray Assembly > Stapling Operation

Stapling Operation

1) At the end of alignment operation, the machine moves down the swing guide and performs
stapling.
At this time, if the process stopper position is overlapping that staple position, the process
stopper is moved away.
[2]
[1] Swing guide
[2] Stapled stack of sheets
[3] Stack delivery roller
2 Technology > Intermediate Process Tray Assembly > Stapling Operation
[1]
[5]
[6]
[4]
[3]
F-2-34
[4] Stapler
[5] Aligning plate
[6] Process stopper
CAUTION:
The machine's stapling sequence consists of the following operations: driving a staple,
cutting the staple tips, clinching the staple.
[1]
[3]
[4]
[5]
[1] Stack of sheets
[2] Staple
[3] Driving a staple
2-24
[2]
F-2-35
[4] Cutting the staple tips
[5] Clinching the staple
2-24