Canon Booklet Finisher-D1 Service Manual page 331

5) Remove the Screw on the Latch Plate (Front). (The removed Screw will be used when
connecting the upstream equipment.)
6) Remove the Rear Small Cover.
• 1 Screw
Screw
Rear Small Cover
7
Installation > Installation Procedure > Before Installing the Finisher
Latch Plate(Front)
F-7-18
F-7-19
7 Installation > Installation Procedure > Before Installing the Finisher
7) Remove the screw on the Latch Plate (Rear) and bring the hinge down toward the front. (The
removed Screw will be used when connecting the upstream equipment.)
Latch Plate (Rear)
7-9
Screw
F-7-20
7-9