Canon Booklet Finisher-D1 Service Manual page 150

4
Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the Belt Roller > Procedure
Removing the Belt Roller on the front side
5) While releasing the Belt Roller Unit [1], slide the bearing [2] from the Support Plate [3].
6) Remove the Belt Roller [5] from the Delivery Roller Shaft [4].
[2]
[3]
[4]
[1]
Removing the Belt Roller on the rear side
7) Remove the E-ring [1].
[1]
4 Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the Belt Roller > Procedure
[4]
[5]
F-4-208
F-4-209
8) Move the gear [1], and remove the Parallel Pin [2].
9) Remove the E-ring [1] and slide the bearing [2].
4-87
[2]
[1]
F-4-210
[1]
[2]
F-4-211
4-87