Setting Of Tray Speed; Preparations; Procedure - Canon Booklet Finisher-D1 Service Manual

5
Adjustment > Auxiliary Adjustment > Setting of Tray Speed > Procedure
<In the case of upper curl, When trailing edge leaning occurred>
4) Press switch SW385 [1] again to complete this adjustment.
SW382
SW381
SW383 SW384 SW385
(-) (+)
5 Adjustment > Auxiliary Adjustment > Setting of Tray Speed > Procedure
F-5-302
ENTER
[1]
F-5-303

Setting of Tray Speed

Execute this adjustment in the case of abnormal sound when the tray is moved up/down.
Adjusting method is as follows:

■ Preparations

1) Turn ON the power of the finisher.
2) Turn ON the power of the host machine to be on to be on standby.
3) Open the front cover and put the door switch tool into the door switch.
4) Remove the switch cover.
NOTE:
Refer to "Preparations 5-6" for details of step 1) to 4).

■ Procedure

1) Set DIP SW382 [1] on the switch PCB as shown in the figure below.
[1]
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
F-5-304
5-124
5-124