Canon Booklet Finisher-D1 Service Manual page 33

2
Technology > Feeding Unit > Side Registration Correction Operation Shift Operation
4) Upon job offset selection, the shift roller unit is moved either forwards or in reverse, the
same as for side registration shift. (Ref.)
This causes the stacking position for each sheaf to change when the paper is output to the
delivery tray.
[1]
[2]
NOTE:
At this time, the degree of shift is decided after taking the side registration correction
value into account.
2 Technology > Feeding Unit > Side Registration Correction Operation Shift Operation
[1]
[2]
F-2-17
2-14
2-14