Canon Booklet Finisher-D1 Service Manual page 96

4
Parts Replacing and Cleaning > Stacking Assembly > Removing the Tray A Unit > Procedure
4) Remove the Neat Stack Relay PCB Support Plate [1].
• 4 Screws [2]
x4
[2]
5) Pull out the Grounding Wire [1] and the harness [2] from the hole [A].
• 3 Screws [3]
• 1 Toothed Washer [4]
• 1 Connector [5]
• 1 Wire Saddle [6]
[A]
x2
[6]
[2]
[5]
[1]
4 Parts Replacing and Cleaning > Stacking Assembly > Removing the Tray A Unit > Procedure
[2]
[1]
F-4-55
[3]
[4]
[3]
F-4-56
6) Remove the Tray A Cover [1].
• 4 Screws [2]
x4
4-33
[2]
[2]
[1]
F-4-57
4-33