Removing The Saddle Intermediate Static Eliminator; Preparation; Procedure; Removing The Saddle Stapler - Canon Booklet Finisher-D1 Service Manual

4
Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Saddle Stapler > Procedure

Removing the Saddle Intermediate Static Eliminator

■ Preparation

1) Open the Front Cover.
2) Pull out the Saddle Unit.

■ Procedure

1) Move the grip [1] in the direction of the arrow to open the Saddle Stack Guide Assembly [2].
[2]
2) Remove the Saddle Intermediate Static Eliminator [1].
[1]
4 Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Saddle Stapler > Procedure
[1]
F-4-218
F-4-219

Removing the Saddle Stapler

■ Preparation
1) Open the Front Cover.
2) Pull out the Saddle Unit.
■ Procedure
CAUTION:
When replacing or installing/removing the Saddle Stapler, be sure to perform the
following adjustment.
• Adjusting the Saddle Staple Alignment (Refer to page 5-63)
1) Move the grip [1] in the direction of the arrow to open the Saddle Stack Guide Assembly [2].
[2]
4-91
[1]
F-4-220
4-91