Basic Sequence Of Operations - Canon Booklet Finisher-D1 Service Manual

2
Technology > Saddle Stitcher Unit > Basic Sequence of Operations
Saddle Stitcher Controller PCB
[1] [2]
PS109
[1] Saddle front sensor signal PS101 : Saddle inlet sensor
[2] Saddle vertical path sensor signal PS102 : Saddle vertical path sensor
[3] Saddle inlet sensor signal PS109 : Saddle press front sensor
2 Technology > Saddle Stitcher Unit > Basic Sequence of Operations
[3]
PS101
PS102
F-2-46

Basic Sequence of Operations

The saddle stitcher block uses the following sequence of operations:
1. Transport [1]
Moves the paper from the transport block to the vertical path assembly.
2. Alignment [2]
Aligns the edges of sheets of paper coming to the transport block.
3. Stitching [3]
Uses the stitcher to staple the middle of the stack.
4. Folding/Delivery [4]
Folds the sheet in half, and sends the result to the saddle delivery tray.
The particulars of the individual operations are as follows:
[4]
[1]
[3]
[2]
F-2-47
2-30
2-30