Canon Booklet Finisher-D1 Service Manual page 113

4
Parts Replacing and Cleaning > Feed Assembly > Removing the Side Registration Shift Unit > Procedure
2) Remove the Latch Base Cover (Upper Right) [1].
• 1 Screw [2]
• 2 Hooks [3]
[3]
3) Remove the Latch Base Support Plate [1].
• 2 Screws [2]
[1]
4 Parts Replacing and Cleaning > Feed Assembly > Removing the Side Registration Shift Unit > Procedure
[1]
[2]
F-4-104
[2]
F-4-105
4) Remove the Rear Cover Support Base [1].
• 3 Screws [2]
[2]
[1]
5) Remove the Feed Stay (Upper Right) [1].
• 4 Screws [2]
[2]
4-50
x2
[2]
F-4-106
[1]
[2]
F-4-107
4-50