Feed/Drive System; Outline - Canon FINISHER-C1 Service Manual

II. FEED/DRIVE SYSTEM
A.

Outline

The finisher is designed to operate according to the commands from its host copier to deliver
arriving copies to trays in the appropriate mode: simple stacking, shifting, stapling. Or, the copier
may request delivery to the interrupt delivery tray.
See Figure 2-201 for a diagram of the four modes of delivery (five for the Saddle Finisher-C2).
Method of delivery
Normal delivery tray
Normal delivery tray
Normal delivery tray
(no stapling)
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 FINISHER UNIT BASIC OPERATION
Normal delivery
Interrupt delivery
Saddle stitch delivery (Saddle Finisher-C2 only)
Figure 2-201
Figure 2-202
Simple stacking
Job offset
Staple
Front diagonal
Rear 1-point
Rear diagonal
2-point
Simple stacking
Interrupt delivery tray
To saddle stitcher unit
(Saddle Finisher-C2)
2-9