Removing The Positioning Plate Unit; Preparation; Procedure - Canon Booklet Finisher-D1 Service Manual

4
Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Positioning Plate Unit > Procedure

Removing the Positioning Plate Unit

■ Preparation

1) Open the Front Cover.
2) Pull out the Saddle Unit.
3) Remove the Saddle Inner Cover (Lower).(Refer to page 4-89)
4) Remove the Thrust Unit.(Refer to page 4-95)

■ Procedure

1) Free the harness [1]
• 4 Connectors [2]
• 6 Wire Saddles [3]
• 1 Reuse Band [4]
• 1 Edge Saddle [5]
[3] [2] [3]
x4
[3]
x8
[4] [2]
[5] [1]
4 Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Positioning Plate Unit > Procedure
[2]
F-4-237
2) Remove the Positioning Plate Unit [1].
• 2 Screws [2]
[2]
4-98
[1] [2]
F-4-238
4-98