Download  Print this page

Advertisement

NAGEL FINISHER
Service Support Guide
Canon U.S.A., Inc.
Systems & Technical Support Division
September 2001
Rev. 0
A Service Guide for Non-Canon Brand Products

Advertisement

Table of Contents

   Summary of Contents for Canon Nagel

  • Page 1 NAGEL FINISHER Service Support Guide Canon U.S.A., Inc. Systems & Technical Support Division September 2001 Rev. 0 A Service Guide for Non-Canon Brand Products...
  • Page 2 PRINTED MATTER. USE OF THIS SERVICE SUPPORT GUIDE SHOULD BE STRICTLY SUPERVISED TO AVOID DISCLOSURE OF CONFIDENTIAL INFORMATION. THIS SERVICE SUPPORT GUIDE INCLUDES INFORMATION RELATING TO THE NAGEL FINISHER, A PROFESSIONAL BOOKLET MAKER MANUFACTURED FOR THE CLC 5000 BY Ernst Nagel GmbH. Nagel Finisher Service Support Guide Rev.
  • Page 3 Pursuant to the dealer agreement with Canon U.S.A., Inc., this service support guide is solely for reference purposes and may be used only by authorized Dealers of Canon U.S.A., Inc. No part of this service support guide may be reproduced or transmitted in any form by any means, electronic or mechanical, for any purpose without the prior written consent of Canon U.S.A., Inc.,...
  • Page 4: Table Of Contents

    Nagel Finisher Service Support Guide Table of Contents Product Overview ............................1 Design Features..............................1 Nagel Booklet Maker/FN5 ..........................1 Nagel Trimmer/TP5............................1 Sorting & Stacking ............................1 Off-Line And On-Line Usage..........................1 Options To Increase Productivity ........................1 III. Product Configuration ............................2 Nagel Finisher Item Numbers..........................3 Consumables..............................3...
  • Page 5: Product Overview

    Product Overview The Nagel™ Finisher is a Professional Booklet maker manufactured and designed for the CLC 5000 by Ernst Nagel GmbH. The Nagel Finisher consists of the Nagel Booklet Maker/FN5 and may include the optional Nagel Trimmer/TP5. The Nagel Finisher creates booklets on-line using the CLC 5000 with a majority of functions (booklet size, format, trim, staple modes, etc.)
  • Page 6: Product Configuration

    Nagel Trimmer/TP5 (Option) Nagel Booklet Maker/FN5 Nagel Finisher Items included in the Nagel Booklet Maker/FN5 Box 1 x Nagel Booklet Maker/FN5 2 x Normal Stapling Head 5.000 FN5 (already inside the machine) 1 x Belt Stacker 1 x Stacker Wheel...
  • Page 7: Nagel Finisher Item Numbers

    210 staples x 24 strips Item Numbers and Part Numbers are subject to change due to engineering changes, etc. The Nagel Booklet Maker/FN5 requires a Buffer Pass Unit-B1 (6667A002AA) and Buffer Pass Side Cover (6883A001AA). Nagel Finisher Service Support Guide Rev.
  • Page 8: Specifications

    Head/Cartridge • Loop: 210 capacity / strip (210 staples x 24 strips) The Nagel Booklet Maker/FN5 will operate on 115V however; 208V is required when attaching the optional Nagel Trimmer/TP5. Nagel Finisher Service Support Guide Rev. 0 September 2001 Page 4...
  • Page 9: Service Features

    NOTE: Due to the weight of the Nagel Finisher, it is recommended that at least four people be used to lift each section off the palate. Estimated installation times are based on hardware installation with an experienced technician only.
  • Page 10: Power Requirements

    Power Requirements The Nagel Finisher comes with a 208V power cord (actually rated at 230V) to be used at the same voltage as the CLC 5000. The Nagel Booklet Maker/FN5 is installed with the supplied 208V plug, however, a 115V cable can be purchased separately to operate the Nagel Booklet Maker/FN5 at 115V.
  • Page 11: Escalation Procedure

    Nagel Finisher Service Support Guide Escalation Procedure The Canon Connectivity escalation procedure diagrammed below will be utilized for the support of the Nagel Finisher. Nagel Finsher Not Operating Properly Technician escalates the problem to the supervisor and dealership technical support Dealership Needs Canon’s Assistance...
  • Page 12: Technical Training

    Technical Training Certification, Availability and Prerequisite Technicians will be trained and certified in the Nagel Finisher two-day In- House Training Classes held at the Canon Regional Training Centers. The prerequisite for this class is CLC 5000 series course. Contact your Canon Regional Training Center or the Canon on-line technical e-Support Center for specific class schedules and location.

Comments to this Manuals

Symbols: 0
Latest comments: