Intermediate Process Tray Assembly; Overview - Canon Booklet Finisher-D1 Service Manual

2
Technology > Intermediate Process Tray Assembly > Overview

Intermediate Process Tray Assembly

Overview

The intermediary tray block serves to shift or staple a stack of sheets in response to the
instructions from the finisher controller PCB, and then sends the result to
the stacking block. The paper path is fitted with 2 sensors for detection of a jam.
Finisher controller PCB
[1] [2] [3] [4] [5] [6] [7]
M9
M16 M13 M19 M27 M18 M15 M14
M10
2 Technology > Intermediate Process Tray Assembly > Overview
[8] [9] [10] [11] [12] [13] [14] [15] [16]
M16 M20 M26 M17 M12 M11 M25 M21
F-2-22
[1] Front alignment motor drive signal/
rear alignment motor signal
[2] Stack delivery auxiliary motor drive
signal
[3] Stack delivery motor drive signal
[4] Delivery angle adjustment motor
drive signal
[5] Swing guide motor drive signal
[6] Paddle rotation motor drive signal
[7] Paddle lift motor drive signal
M5 : Delivery motor
M9 : Front alignment motor
M10 : Rear delivery auxiliary motor
M11 : Process tray shift motor
M12 : Assist motor
M13 : Stack delivery auxiliary motor
M14 : Paddle rotation motor
M15 : Paddle lift motor
2-18
[8] Paper trail edge retaining motor drive
signal
[9] Operation feed motor drive signal
[10] Transport belt motor drive signal
[11] Assist motor drive signal
[12] Staple motor drive signal
[13] Staple motor shift drive signal
[14] Process tray shift motor signal
[15] Upper guide motor
M16 : Paper trail edge retaining motor
M17 : Transport belt shift motor
M18 : Swing guide motor
M19 : Stack delivery motor
M20 : Upper guide motor
M21 : Staple shift motor
M25 : Staple motor
M27 : Delivery angle adjustment motor
2-18