Straight Path Paper Feed Operation - Canon Staple Finisher-D1 Service Manual

2
Technology > Feeding Unit > Straight Path Paper Feed Operation

Straight Path Paper Feed Operation

When the shift or staple mode is not selected, this finisher delivers the paper on the stacking
tray unit immediately without stacking the paper to the processing tray unit.
The feeding unit delivers each sheet of paper on the stacking tray in the straight path paper
feed operation.
The inlet feed motor (M200) drives and the saddle inlet roller and inlet roller rotate to feeds
the paper, and then the feed motor (M101) and the buffer feed motor (M102) drive and the
feed roller 1 and feed roller 2 and feed roller 3 and pre-delivery roller and stack delivery
upper/lower roller rotate to feeds the paper when the inlet sensor (S101) has detected the
paper.
Feed Roller 3
Stack Delivery
Upper Roller
S102
Stacking Tray
Stack Delivery
Paper Retainer
Lower Roller
2 Technology > Feeding Unit > Straight Path Paper Feed Operation
Disengage Roller
Feed Roller 1
S101
Saddle Inlet Roller
Feed Roller 2
Inlet Roller
F-2-9 F-2-9
At this time, if the paper length is under 257mm, the feed roller disengage/buffer flapper
motor (M119) drives so that the disengage roller and the feed roller 3 contact.
Disengage Roller
S101
S102
F-2-10 F-2-10
2-7
2-7