Canon Booklet Finisher-D1 Service Manual page 269

5
Adjustment > Auxiliary Adjustment > Adjusting Position of Saddle Lead Edge Stopper
3) Free the 2 harnesses.
• 2 Connectors [1]
• 3 Wire Saddles [2]
• 3 Edge Saddles [3]
[3] [2]
5 Adjustment > Auxiliary Adjustment > Adjusting Position of Saddle Lead Edge Stopper
4) Remove the Saddle Stitcher Controller PCB and the Harness Guide [1].
• 2 Screws [2]
[3]
[2]
[1]
[3]
[2]
5) Loosen the 2 fixing screws [1] of the lead edge stopper fixture by approx. quarter turn.
F-5-217
x2
[1]
[1]
5-93
[2]
F-5-218
[1]
F-5-219
5-93