Connecting With The Host Machine - Canon Booklet Finisher-D1 Service Manual

NOTE:
The following procedure is required only when options other than the Host machine are
connected.
8) Be sure to affix the Cover Spacer by beginning at the center of range A.
CAUTION:
Be careful not to make a gap for B.
7
Installation > Installation Procedure > Connecting with the Host Machine
F-7-21
7 Installation > Installation Procedure > Connecting with the Host Machine

Connecting with the Host Machine

CAUTION:
Be sure the power of the Host Machine is turned OFF and the Power Plug is
disconnected from the outlet.
1) Remove the Left Rear Cover.
• 1 Claw
• 1 Protrusion
Claw
Protrusion
7-10
F-7-22
7-10