4) Lock the Latch Plate (Front) to the cover. Then, fit the positioning pin of the Paper Folding
Unit to the positioning plate hole on the Finisher to connect.
<Front side>
<Rear side>
7
Installation > Installation Procedure > Connecting with the Paper Folding Unit
Latch Plate(Front)
F-7-45
Positioning Pin
Hole
F-7-46
7
Installation > Installation Procedure > Connecting with the Paper Folding Unit
CAUTION:
When connecting the inner side, take caution not to get the cable pinched.
5) Secure the Latch Base (Front).
• 1 Screw (Use the Screw removed in the step 5) "Before Installing Finisher" )
Screw
6) Close the Front Cover of the Finisher.
7-19
F-7-47
Latch Plate(Front)
F-7-48
7-19