Canon Booklet Finisher-D1 Service Manual page 173

4
Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Fold Roller > Procedure
7) Remove the Unit Fixation Base (Rear) [1] at the rear side of the Saddle Unit.
• 2 Screws [2]
[2]
8) Remove the C-ring [1] and the Ball Bearing [2].
[1]
4 Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Fold Roller > Procedure
[1]
F-4-275
[2]
F-4-276
9) Slide the Fold Roller (Upper) [1].
[1]
10) Remove the Fold Roller (Upper) [1].
[1]
4-110
F-4-277
F-4-278
4-110