Adjusting Position Of Saddle Lead Edge Stopper - Canon Booklet Finisher-D1 Service Manual

5
Adjustment > Auxiliary Adjustment > Adjusting Position of Saddle Lead Edge Stopper

Adjusting Position of Saddle Lead Edge Stopper

Execute this adjustment in the case of displacement in saddle fording position or replacing
the finisher controller PCB.
1) Output paper from the saddle assembly and measure displacement amount (C) for folding
position.
[C]
1) Pull out the saddle assembly, and then remove the PCB cover [1].
• 6 screws [2]
[1]
5 Adjustment > Auxiliary Adjustment > Adjusting Position of Saddle Lead Edge Stopper
F-5-214
[2]
[2]
F-5-215
2) Free the harness [1] from the Harness Guide [2].
• 12 Connectors [3]
[1] [3]
[3]
[2] [3]
[3]
[3]
F-5-216
5-92
5-92