Installation Procedure; Before Installing The Finisher - Canon Booklet Finisher-D1 Service Manual

Installation Procedure

Before Installing the Finisher

1) Remove all the tapes and cardboards attached to the equipment.
2) Open the Finisher Front Cover.
7
Installation > Installation Procedure > Before Installing the Finisher
F-7-15
F-7-16
7 Installation > Installation Procedure > Before Installing the Finisher
NOTE:
Step 3) and 4) are needed to be performed only for the Saddle Stitch Finisher.
3) Pull out the Saddle Unit and remove the packing tapes.
4) Put the Saddle Unit back.
7-8
Packing Tapes
F-7-17
7-8