Canon Booklet Finisher-D1 Service Manual page 149

4
Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the Belt Roller > Procedure
CAUTION:
When installing the Delivery Roller Shaft [1], fit the 2 cut surfaces [A] in the groove of
the Mounting Plate with the 2 cut surfaces [B] of the Delivery Roller Shaft.
[1]
[A]
4 Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the Belt Roller > Procedure
[1]
[B]
[B]
[A]
F-4-205
3) Remove the following parts.
• 1 E-ring [1]
• 1 Washer [2]
• 1 Bearing [3]
[3]
[2]
[1]
4) Slide the 2 couplings [1].
• 2 Screws [2] (to loosen)
[1]
[2]
F-4-206
[2]
F-4-207
4-86
4-86