Removing The Alignment Roller Unit; Preparation; Procedure - Canon Booklet Finisher-D1 Service Manual

4
Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Alignment Roller Unit > Procedure

Removing the Alignment Roller Unit

■ Preparation

1) Open the Front Cover.
2) Pull out the Saddle Unit. (service position)(Refer to page 4-99)
3) Remove the Saddle Inner Cover (Lower).(Refer to page 4-89)
4) Remove the Press Unit.(Refer to page 4-102)

■ Procedure

1) Disconnect the connector [1].
[1]
4 Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Alignment Roller Unit > Procedure
F-4-283
2) Remove the Alignment Roller Unit [1].
• 1 Screw [2]
• 2 Hooks [3]
[2]
[3]
4-112
[1]
F-4-284
4-112